Guides

  Follow these easy steps to achieve the Topaz Standard:  STEP 1 /Start by cleaning the area of the car where you plan to apply the decal. We recommend using Topaz All Purpose Cleaner to remove any dirt, wax, or grease. Wipe the surface with a clean, microfibre cloth. STEP 2 /Carefully position the decal on the car, making sure it is centred and aligned as you desire. You may use masking tape to temporarily hold the decal in place.  STEP 3 /If your decal is large, you can create a hinge with masking tape. Apply a strip of tape along the top edge of the decal, allowing it to act as a hinge that holds the decal in place while you work. STEP 4 /Peel off a small portion of the backing from the decal. Be careful not to touch the adhesive side of the decal with your fingers.  STEP 5 /Slowly press the exposed part of the decal onto the car surface, starting from the centre and working your way outward. Use a squeegee to smooth out any air bubbles and ensure proper adhesion. STEP 6 /Gradually peel off the backing while smoothing the decal onto the car surface. Work in small sections, especially for larger decals, to avoid air bubbles or misalignment.   STEP 7 /If your decal has a transfer tape covering the top, carefully peel it away at a sharp angle. This should be done once the decal is firmly in place. STEP 8 /If you notice any air bubbles trapped under the decal, use the squeegee to smooth them out towards the edges. STEP 9 /Step back and inspect the decal for proper alignment and adhesion. Make any necessary adjustments while the decal is still partially applied.  STEP 10 /Let the decal cure for at least 24 hours before washing or exposing it to harsh weather conditions. This allows the adhesive to fully bond with the car surface.  REGRETTABLY, WE CANNOT PROVIDE REPLACEMENTS FOR MISTAKES RESULTING FROM IMPROPER INSTALLATION OR PRODUCT MISUSE. Check out our installation video!

Topaz Quick Detailer is the perfect companion for quick and easy maintenance of your paintwork. The formulation has been designed to enhance gloss levels and add slickness, helping to prevent the attraction of dust. It also works exquisitely in removing smears, fingerprints and water spots post-wash (whilst being safe on the coating underneath). 'Maintain' - Gloss enhancing formulation for easy paint maintenance.

Topaz Hydro Lite vehicle protection sealant has been formulated to keep your paintwork in its hydrophobic state post Ceramic Coating application in between washes. It also adds an outstanding hydrophobic coating to non-coated paintwork which leads to remarkable water beading and high gloss results in a simple and quick spray/rinse off process. Its revolutionary formulation adds a level of protection against environmental threats that is not to be ignored. 'Impressive' - Fast, easy and effective and provides impressive water repellent properties.

Topaz Shampoo Plus goes a step further than ordinary shampoo. As well as aiding in the removal of dirt, grime and traffic film, Shampoo Plus leaves behind a hydrophobic coating that repels future contaminants. The ingredients used are selected specifically to make washing as easy as possible and keep the mixture pH-balanced for safe use on expensive materials. 'Cleanse' - High foaming, pH-balanced Shampoo that leaves a hydrophobic coating.

Topaz Fabric Protector is the next stage in keeping your vehicle’s fabrics protected with outstanding stain and dirt repellence. With advanced hydrophobic technology it provides a protective film to the fabric, prolonging the life of the material. Suitable for all types of fabrics, from convertible roofs to carpets to seat upholstery. 'PRESERVE' - Outstanding protection on all types of fabric to repel dirt and stains.

Topaz Satin Tyre Dressing has been designed to produce a subtle quality shine finish on the tyre. Its high quality, silicone-based formula was manufactured using organic solvent blends which will nourish the rubber whilst protecting it from the harsh environment that tyres are subjected to.

Topaz Advanced Pre-Wash is a powerful yet gentle cleaner which effectively breaks down dirt, traffic film and road grime upon contact without removing coatings. Topaz Pre-Wash formulation is safe to be used for all exterior surfaces, door shuts, arches, boot liners, engine bays, wheels and tyres. 'Extract' - The powerful yet gentle formulation which effectively removes grime and dirt prior to the wash process.

Topaz Stain and Odour Eliminator has been designed to eliminate bacteria acting on organic matter. This is a long-lasting effective solution to tackle the organic matter the bacteria thrive on. Its PH neutral formulation is safe to use on exotic materials found in supercars today. Ideal to remove stains including mould, blood, tea, coffee, etc. and eradicate odours associated with dogs, mould, milk, cigarettes or vomit. 'Eliminate' - Powerful unpleasant odour eliminator and effective stain remover.

Topaz Rejuvenate Interior Cleaner was developed to gently but effectively clean all interior surfaces, such as leather, vinyl and plastic. The formulation is phosphate-free, non-acidic and non-caustic and uses mild, low foaming surfactants with outstanding wetting properties and detergent power to remove dirt, oil, grease, and nicotine easily.  Topaz Rejuvenate Interior Cleaner cleans and freshens surfaces leaving them streak free and without glossiness.  Every bottle includes a trigger spray cap for easy application.  'Rejuvenate' - Non-acidic luxury interior cleaner with outstanding detergent power.

Topaz Tar and Glue Remover is a highly effective and safe to use solvent for direct removal of stubborn contaminants from the vehicles' hard and painted surfaces. Its formulation has been refined using aliphatic solvents and natural oils to ensure effective sticky substance removal with no damage to the affected surfaces. 'Refined' - Refined, mild but highly effective solvent for tar and glue removal.

Topaz Leather Guard leaves a micro film layer which cling to leather to protect it. Leather Guard has been designed to prevent dye transfer from clothing and to repel water and dirt, thus making future cleaning easier and also leaving leather feeling fresh to the touch. 'Guard' - Gentle, nourishing, water repellent sealant leaves leather feeling fresh to touch.

Topaz Leather Cleaner's thick formula has been designed to help effectively clean and moisturise the leather by restoring its natural colour. The PH-balanced gel-like rich consistency lubricates and emulsifies dirt, oils, and grease from deep within the pores making it easier to remove. When cleaned, leather will smell fresh, and feel smooth and luxurious. 'Cleanse' - Designed to preserve & effectively clean leather, leaving it feeling softer.

Topaz Iron Remover is designed to safely dissolve and remove potentially damaging airborne iron particles and brake dust fallout which cling to painted and metal surfaces. Due to its pH-neutral formulation, it offers safe and effective treatment.  Thick gel-like rich consistency allows the product to actively cling to contamination and break the bond easily no brushing required. 'React' - Highly effective fallout remover for metal and painted surfaces.

Topaz Glass Cleaner was developed specifically for application on automotive glass and features an innovative formulation that guarantees a thorough removal of dirt, grease, insects and waxes easily, leaving a streak-free finish.  The luxury formulation provides protection against fogging and uses special spreading agents to provide a smooth gliding action during cleaning. Topaz Glass Cleaner holds to the glass to ensure it doesn't evaporate too quickly, and without any 'build-up' effect.  'Purify' - Powerful glass cleaner with luxury formulation for smooth, thorough cleaning.

Topaz Fabric and Carpet Cleaner works deep within the fibers and is designed to break down contaminants, releasing grime from fabric quickly and effectively, leaving your carpets and upholstery looking like new.  'Fresh' - Designed to break down grime quickly and effectively, leaving carpet and fabric smelling fresh.

Topaz Clay Lubricant is designed to provide an easy glide for the safe use of a clay bar, allowing effective removal of contamination, whilst reducing the risk of marring paintwork. Clay lubricant can be used with any manufacturer of clay and does not affect the clay itself. 'Glide' - Easy to use clay lubricant, reduces risk of marring.